Wire Erosion Machines

If you cannot see a machine that fits your requirements please give us a call. For further details please click on the photograph.

If you have any questions about any of the products shown please feel free to contact us on +44 1594 826 779 or if you prefer you can contact us online by completing our online contact form.

2001 Charmilles Robofil 240 Taper + / – 30 degrees
Workpiece max 800 x 500 x 220, travels X 350, Y 220, Z 220
Submerged machine with auto wire threading – SOLD

2000 Charmilles robofil 190

Only done 6,600 machining hours

Non submerged machining

Work piece maximum 700 x 300 x 150

Axis travels X 250, Y 160, Z 150 – SOLD

Fanuc Alpha 1iC built in 2006

Submerged machining

Automatic wire threading

Work piece maximum 1100 x 800 x 400

Axis travels X 550, Y 370, Z 410

2008 Charmilles Cut 20 Taper + / – 25 degrees
Workpiece max 900 x 680 x 250, travels X 350, Y 250, Z 250
Submerged machine with auto wire threading

2001 Charmilles 440 Taper + / – 25 degrees
Workpiece max 1200 x 700 x 400, travels X 550, Y 350, Z 400
Submerged machine with auto wire threading

1998 Fanuc 1C  Taper + / – 30 degrees
Workpiece max 1100 x 730 x 300, (big work tank fitted) travels X 520, Y 370, Z 300
Submerged machine with auto wire threading 

 





2008 Charmilles Robofil 440SLP Taper + / – 30 degrees
Workpiece max 1200 x 700 x 400, travels X 550, Y 350, Z 400
Submerged machine with auto wire feed 

 


310..1996


1996 Charmilles Robofil 310F Taper + / – 30 degrees
Workpiece max 850 x 500 x 400, travels X 400, Y 250, Z 400
Submerged machine with auto wire feed.

 



1995 Fanuc Alpha 0B Taper + / – 30 degrees
Workpiece max 650 x 420 x 150 Travels X 300, Y 200, Z 150
Submerged machine with no auto wire feed 

 





1989 Fanuc W2 Taper + / – 10 degrees
Workpiece max 1120 x 790 x 300, travels X 500, Y 350, Z 300
Non submerged machine

 





1990 Fanuc W1 Taper + / – 10 degrees
Workpiece max 980 x 700 x 250, travels X 350, Y 250, Z 250
Non submerged machine

 


Fanuc W0 1998


1988 Fanuc W0 Taper + / – 10 degrees
Workpiece max 770 x 550 x 150, travels X 350, Y 200, Z 150
Non submerged machine

 


2001 Fanuc Alpha 1iA, taper + / – 30 degrees
Workpiece max 790 x 730 x 400, Travels X 520, Y 370, Z 310
Submerged machine with auto wire feed– SOLD

 





1998 Fanuc Alpha OC, taper + / – 30 degrees
Workpiece max 750 x 500 x 180, Travels X 320, Y 220, Z 180
Submerged machine with auto wire feed

 




 

EDM Brother HS100 Wire Machine
This is a used machine but has been fully refurbished.  The travel size is 770 x 550 x 150.

 

Work piece maximum 384 x 322